Skip to content
Mahindra BE 6 SPORTEQ in Graphite Storm, gloss finish — official Mahindra render
Back to the factory BE 6

Independent concept · not a Mahindra variant

RIDERZPRO BE 6
LIMITED EDITION

COMING SOON

The BE 6, rebuilt without limits.

RIDERZPRO Limited Edition is an independent customisation concept by RIDERZPRO and is not a factory Mahindra variant. It carries no Mahindra endorsement, certification or partnership.

Official Mahindra render. Mahindra states its vehicle imagery is a creative visualisation and that colour may differ from the actual paint.

Design philosophy

IT HAS TO LOOK MANUFACTURABLE.

Futuristic, tactical, premium — but still a car you could get an insurance quote on. Anything we cannot imagine building, we do not draw.

MANUFACTURABLE

Every part is drawn to be printed, finished and fitted — not rendered for a poster.

ROAD-USABLE

Ground clearance, approach angles, sensor lines and door apertures all still have to work.

RESTRAINED

One idea per surface. Visual clutter is how a concept stops looking expensive.

HONEST

Every element carries its development stage. Nothing is presented as finished that is not.

01

EXTERIOR

RIDERZPRO AERO — printed aero, trim and fender work, each with its version, material and stage.

Front aero blade

PROTOTYPE
Version
v0.3
Material
ASA, glass-fibre reinforced
Finish
Primed and painted to body colour
Installation
3M VHB bonded to the lower bumper, no drilling
Weight
780 g
Price
No price — not on sale

First article on a test car. Clearance to the front ADAS sensors is being measured.

Professional engineering validation required

  • May obstruct ADAS sensors or cameras — recalibration and validation required.

Fender extensions

PROTOTYPE
Version
v0.2
Material
ASA, glass-fibre reinforced
Finish
Textured satin black
Installation
Bonded with factory clip locations reused
Weight
410 g
Price
No price — not on sale

Anything that changes the vehicle's overall width has a regulatory question attached to it.

Professional engineering validation required

  • Subject to applicable Indian regulations and certification requirements.

Subject to applicable Indian regulations and certification requirements.

Aero inserts

TESTING
Version
v0.4
Material
ASA
Finish
Gloss black
Installation
Clip-in to existing bumper apertures
Weight
190 g
Price
No price — not on sale

Charging-port bezel

TESTING
Version
v1.0
Material
ASA
Finish
Anodised-look satin
Installation
Adhesive bezel around the factory port aperture
Weight
60 g
Price
No price — not on sale

In UV and cable-abrasion testing. This part gets touched every single charge.

Number plate surround

AVAILABLE
Version
v1.1
Material
ASA
Finish
Satin black
Installation
Uses the factory plate fixings
Weight
120 g
Price
₹2,400

Must not obscure any part of the registration mark. Fitted to the regulation, not to the look.

Professional engineering validation required

  • Subject to applicable Indian regulations and certification requirements.

Subject to applicable Indian regulations and certification requirements.

Rear aero element

CONCEPT
Version
v0.1
Material
TBD
Finish
TBD
Installation
TBD
Weight
Not printed — no measured weight
Price
No price — not on sale

Drawn only. No model, no print, no weight.

Roof accessory rail

CONCEPT
Version
v0.1
Material
TBD
Finish
TBD
Installation
TBD
Weight
Not printed — no measured weight
Price
No price — not on sale

A printed part carrying a roof load is a structural question. It will not leave concept without an engineer.

Professional engineering validation required

  • Affects structural integrity — professional engineering validation required.
  • Adds mass, which changes range, braking and load ratings — engineering validation required.

02

INTERIOR

RIDERZPRO INTERIOR — storage, docks, trim and the Autoform upholstery catalogue.

Centre console organiser

AVAILABLE
Version
v1.2
Material
PETG
Finish
Soft-touch textured
Installation
Drop-in, no fixings
Weight
240 g
Price
₹3,200

Phone dock

AVAILABLE
Version
v1.3
Material
PETG
Finish
Matte black
Installation
Clips to an existing trim seam
Weight
95 g
Price
₹2,100

Sited clear of the passenger screen and out of the airbag path.

Professional engineering validation required

  • In the deployment path of an airbag — professional engineering validation required.

Frunk divider set

READY
Version
v1.0
Material
PETG
Finish
Textured
Installation
Friction fit into the 45-litre frunk
Weight
420 g
Price
₹6,800

Charging cable tidy

AVAILABLE
Version
v1.1
Material
PETG with woven strap
Finish
Matte
Installation
Boot floor mounted
Weight
180 g
Price
₹1,800

Seat-back organiser

READY
Version
v0.9
Material
PETG and textile
Finish
Matte
Installation
Straps to the seat frame
Weight
320 g
Price
No price — not on sale

Signed off, awaiting a production slot.

Cup holder insert

AVAILABLE
Version
v1.0
Material
PETG
Finish
Soft-touch
Installation
Drop-in
Weight
70 g
Price
₹900

Controller mount

PROTOTYPE
Version
v0.2
Material
PETG
Finish
Matte
Installation
Clips to a trim seam, second row
Weight
110 g
Price
No price — not on sale

For TEQ_Play's gaming mode, which is Mahindra's feature — this is only somewhere to put the controller.

Auxiliary switch panel

CONCEPT
Version
v0.1
Material
TBD
Finish
TBD
Installation
TBD
Weight
Not printed — no measured weight
Price
No price — not on sale

Any switch panel taps the vehicle's electrical system. Concept until an auto electrician has specified it.

Professional engineering validation required

  • Taps the vehicle's electrical system — professional installation and validation required.

Autoform seat covers

₹32,000
RIDERZPRO CUSTOMAVAILABLE

Cut to the BE 6's seats from the Autoform design range.

Professional engineering validation required

  • In the deployment path of an airbag — professional engineering validation required.

Full custom upholstery

₹1,45,000
RIDERZPRO CUSTOMAVAILABLE

Retrim in the material and stitch of your choosing. Seat ventilation is preserved through perforation.

Professional engineering validation required

  • In the deployment path of an airbag — professional engineering validation required.

Ambient lighting

₹24,000
RIDERZPRO CUSTOMAVAILABLE

Footwell, door card and console light on its own controller, independent of the factory system.

Professional engineering validation required

  • Taps the vehicle's electrical system — professional installation and validation required.

Premium floor and boot mats

₹14,500
RIDERZPRO CUSTOMAVAILABLE

Cut to the BE 6 floor pan, including the frunk.

Custom steering wheel retrim

₹28,000
RIDERZPRO CUSTOMAVAILABLE

Retrim of the factory wheel. The airbag module and every control is reused, never relocated.

Professional engineering validation required

  • In the deployment path of an airbag — professional engineering validation required.

03

TECHNOLOGY

RIDERZPRO QUANTUM SHIELD — a security architecture concept, not a claim about the car.

RIDERZPRO CONCEPTCONCEPT

RIDERZPRO QUANTUM SHIELD

A security architecture concept. Designed around modern and post-quantum-ready security principles.

Quantum Shield is an architecture study for the Riderzpro systems that would talk to a vehicle — our app, our telemetry, our keys — not a claim about the car. Mahindra's own systems are Mahindra's. What we are working out is how anything we add would authenticate, communicate and be updated without becoming the weakest link in someone's car.

What we are not claiming

  • We do not claim anything is "unhackable".
  • We do not claim anything is "impossible to breach".
  • We do not claim the vehicle becomes post-quantum secure because a Riderzpro component is fitted.
  • We name no specific cryptographic algorithm as implemented, because none has been implemented or validated yet.
  • We make no claim about the security of Mahindra's factory systems, which are outside our scope.

Engineering & certification required

  • Threat model for every Riderzpro component that touches the vehicle
  • Independent security review of the architecture before any implementation
  • Selection of recognised post-quantum cryptographic standards at implementation time, published only once validated
  • Key management and secure provisioning design
  • Penetration testing of the implemented system
  • A responsible disclosure process before anything ships

Professional engineering validation required

  • Touches vehicle cybersecurity — independent security review required.
  • Taps the vehicle's electrical system — professional installation and validation required.

Secure communications

Encrypted transport between vehicle-side hardware, phone and our backend.

Key security

How keys are generated, stored and rotated in hardware.

Authentication

Proving a device is what it says it is, in both directions.

Access control

Who can do what, and how that is revoked.

Tamper detection

Detecting and reporting physical interference with our hardware.

Device authentication

Pairing only devices we can attest.

Post-quantum readiness

Choosing an architecture that can adopt recognised post-quantum standards without being rebuilt.

The phrase we use is “designed around modern and post-quantum-ready security principles”. We do not say unhackable, and we do not say impossible to breach, because no honest engineer would say either about anything.

04

SECURITY

RIDERZPRO ARMOR and RIDERZPRO SECURITY GLASS. The two concepts where careless wording would be dangerous.

RIDERZPRO CONCEPTCONCEPT

RIDERZPRO ARMOR — CONCEPT

A security concept. Not an armoured vehicle.

Armor is our study into what meaningful physical security on a BE 6 would involve. Parts of it are real and testable today — anti-shatter film, secure storage, tracking, tamper alerting. The parts that involve resisting a projectile are not, and separating those two is the entire point of publishing this as a concept.

What we are not claiming

  • We do not claim the vehicle is bulletproof.
  • We do not claim any ballistic resistance level, because none has been tested.
  • We do not claim the glazing, doors or panels have been engineered or certified to any standard.
  • Security film resists shattering and forced entry. That is not ballistic protection and we will not let the two be confused.

Engineering & certification required

  • Structural engineering assessment of the door and pillar structures
  • Complete-vehicle mass and load-path analysis, including the effect on range and braking
  • Ballistic testing of the complete glazing and body system to a recognised standard
  • Suspension and brake re-rating for the added mass
  • Regulatory and legal review under applicable Indian regulations
  • Certification by an accredited test house

Professional engineering validation required

  • Affects structural integrity — professional engineering validation required.
  • Adds mass, which changes range, braking and load ratings — engineering validation required.
  • Replaces or covers glazing — engineering validation and regulatory review required.
  • Affects braking — professional engineering validation required.
  • Subject to applicable Indian regulations and certification requirements.

Subject to applicable Indian regulations and certification requirements.

RIDERZPRO CONCEPTCOMING SOON

RIDERZPRO SECURITY GLASS

CONCEPT — COMING SOON

Ballistic glazing is not a film and not an upgrade. It is a different glass system, several times the mass of what it replaces, and it changes the vehicle it is fitted to. We are publishing the engineering path rather than a product, because there is no product.

What we are not claiming

  • No ballistic rating is promised, quoted or implied.
  • No glazing has been tested.
  • No BE 6 has been converted.

Engineering & certification required

  • Engineering validation of the glazing system
  • Structural validation of the apertures, doors and pillars carrying it
  • Ballistic testing to an appropriate recognised standard
  • Vehicle integration testing, including door hardware, regulators and seals
  • Regulatory and legal review
  • Weight assessment and its consequences for range, braking and handling
  • Certification where required

Professional engineering validation required

  • Replaces or covers glazing — engineering validation and regulatory review required.
  • Affects structural integrity — professional engineering validation required.
  • Adds mass, which changes range, braking and load ratings — engineering validation required.
  • Affects braking — professional engineering validation required.
  • Subject to applicable Indian regulations and certification requirements.

Subject to applicable Indian regulations and certification requirements.

Tracking and recovery

₹26,000
RIDERZPRO CUSTOMAVAILABLE

Independent tracker with its own power, additional to Mahindra's Secure360 Pro rather than a replacement for it.

Professional engineering validation required

  • Taps the vehicle's electrical system — professional installation and validation required.

Secure in-car storage

Priced at production release
RIDERZPRO CUSTOMPROTOTYPE

Lockable compartment under the boot floor. First article built, not yet tested.

Professional engineering validation required

  • Affects structural integrity — professional engineering validation required.

Security film on glazing

Priced on completion of testing
RIDERZPRO CUSTOMTESTING

Anti-shatter film on the side glass. This makes glass harder to break through. It is not ballistic protection and we do not describe it as such.

Professional engineering validation required

  • Replaces or covers glazing — engineering validation and regulatory review required.
  • Subject to applicable Indian regulations and certification requirements.

Subject to applicable Indian regulations and certification requirements.

Intrusion detection

Concept
RIDERZPRO CONCEPTCONCEPT

Additional sensing and tamper alerting. Concept — and it overlaps with what TEQ_Secure already does.

Professional engineering validation required

  • Taps the vehicle's electrical system — professional installation and validation required.
  • Touches vehicle cybersecurity — independent security review required.

05

AUDIO

RIDERZPRO AUDIO 01 — built over the factory 16-speaker Harman Kardon, not ripped out of the car.

MAHINDRA FACTORYThe BE 6 leaves the factory with a 16-speaker Harman Kardon system, Dolby Atmos and Dolby Vision through TEQ_Play. That is the baseline we measure against.

DSP and re-tune over the factory system

₹52,000
RIDERZPRO CUSTOMAVAILABLE

The factory Harman Kardon is a good system. A DSP and a proper tune to the cabin gets more out of it than replacing it does.

Professional engineering validation required

  • Taps the vehicle's electrical system — professional installation and validation required.

Amplifier and subwoofer

₹1,15,000
RIDERZPRO CUSTOMAVAILABLE

Adds the bottom octave the factory system does not reach, sited so the 455-litre boot stays usable.

Professional engineering validation required

  • Taps the vehicle's electrical system — professional installation and validation required.

Component speaker upgrade

₹46,000
RIDERZPRO CUSTOMAVAILABLE

Front stage replacement from the Blaupunkt and RECOIL ranges we stock.

Professional engineering validation required

  • Taps the vehicle's electrical system — professional installation and validation required.

Sound damping

₹38,000
RIDERZPRO CUSTOMAVAILABLE

Doors, arches and boot floor. An EV has no engine noise to mask road roar, so damping does more here than it would on a petrol car.

BalancedBassAudiophileCinemaPerformance

Tell us which of these you are, and we specify around it. The full configurator lives on our audio builder.

06

AI

RIDERZPRO AI DRIVE and RIDERZPRO AI — concepts, and separate from Mahindra's factory AI.

Mahindra's BE 6 already runs its own AI software: the MAIA architecture and six TEQ suites, including TEQ_Talk built with Google Gemini and TEQ_Me driver personalisation. Those are factory features and they are described in the factory section of this site. Everything below is a RIDERZPRO concept — separate software, not yet built, and not an enhancement to Mahindra's system.

AI PERSONAL

CONCEPT

Learns how you like the car set up.

  • Climate preferences
  • Seat position
  • Audio profile
  • Lighting
  • Navigation habits

Already in the factory car: Mahindra's TEQ_Me already recognises the driver on approach and restores seat, climate and charge-schedule preferences.

AI COMFORT

CONCEPT

Optimises the cabin around the journey ahead.

  • Cabin conditioning
  • Charging suggestions
  • Drive experience tuning

Already in the factory car: TEQ_Me already handles cabin pre-cooling and charge scheduling.

AI SECURITY

CONCEPT

Watches the vehicle when you are not in it.

  • Access monitoring
  • Suspicious activity
  • Tamper detection
  • Unauthorised attempts

Already in the factory car: TEQ_Secure already provides Secure360 Pro live monitoring with intrusion alerts.

AI TRIP

CONCEPT

Plans a long drive around the charging, not around the map.

  • Charging stops
  • Range projection
  • Route
  • Weather
  • Traffic

AI GARAGE

CONCEPT

Diagnostics and service reminders, including for the parts we fitted.

  • Vehicle diagnostics
  • Maintenance reminders
  • Riderzpro component health

AI GUARDIAN

CONCEPT

Alerting built around the owner rather than the vehicle.

  • Security monitoring
  • Escalating alerts
  • Trusted contacts

Already in the factory car: Overlaps substantially with TEQ_Secure.

RIDERZPRO AI

CONCEPT

A concept voice assistant for Riderzpro systems. What it could actually answer depends entirely on what a future vehicle integration is permitted to read — so these are the questions we are designing towards, not features that work today.

  • “What's my range?”
  • “Find the nearest fast charger.”
  • “Prepare the cabin for my trip.”
  • “Start my preferred audio profile.”
  • “How much battery will I have when I reach?”

Mahindra's TEQ_Talk, built with Google Gemini, already answers questions like these in the factory car. A Riderzpro assistant would only be worth building for things TEQ_Talk cannot reach — our own components, our own service history, our own build.

RIDERZPRO DRIVE MODES

CITY

CONCEPT

Efficiency-focused. Softer response, stronger regeneration.

SPORT

CONCEPT

Sharper response for a driver who wants it.

LONG RANGE

CONCEPT

Range-conscious climate and drivetrain settings.

NIGHT

CONCEPT

Cabin and ambient lighting configuration for driving after dark.

ROAD TRIP

CONCEPT

Charging plan, navigation and cabin preparation together.

GUARDIAN

CONCEPT

Security-oriented configuration for leaving the car somewhere unfamiliar.

These are RIDERZPRO concepts, not factory drive modes. Mahindra's own TEQ_Drive provides Custom Drive Mode, Drift Mode and Tribe Drive on the factory car. Nothing here modifies or replaces them.

07

PPF

RIDERZPRO SHIELD — the one part of this page that is entirely real today.

Full-body PPF

₹1,85,000
RIDERZPRO CUSTOMAVAILABLE

Every painted panel wrapped in self-healing film. On a satin or matte BE 6 finish the film has to be matched to the finish, not just to the colour.

High-impact areas PPF

₹62,000
RIDERZPRO CUSTOMAVAILABLE

Bonnet, front bumper, mirrors, and the luggage-loading edge. The panels that actually take the hits.

Headlamp protection film

₹7,500
RIDERZPRO CUSTOMAVAILABLE

Clear film over the lighting signature. Optical clarity is the whole job here.

Professional engineering validation required

  • Affects lighting — road-legal configuration required under applicable Indian regulations.

Ceramic coating over PPF

₹34,000
RIDERZPRO CUSTOMAVAILABLE

Applied over the film, not instead of it. Makes the car wash off rather than scrub off.

Interior high-touch film

₹12,500
RIDERZPRO CUSTOMAVAILABLE

Film on the three screens' surrounds, door pulls and the console. On a three-screen cabin this is the difference between a two-year-old interior and a tired one.

08

WHEELS

RIDERZPRO WHEELS — with fitment validation, and a wheel we are refusing to sell yet.

19-inch forged wheel set

₹2,20,000
RIDERZPRO CUSTOMAVAILABLE

Same 19-inch diameter as the factory alloy, so the tyre and the speedometer are unaffected. The safest change you can make to a wheel.

Professional engineering validation required

  • Changes rolling stock — fitment, load and speed rating validation required.

20-inch touring set

Held pending official tyre data
RIDERZPRO CUSTOMCOMING SOON

Matches the diameter Mahindra fits to the Formula E editions. Held until we have the factory tyre sizes in writing — an inch up on an unpublished size is not a fitment we will validate.

Professional engineering validation required

  • Changes rolling stock — fitment, load and speed rating validation required.
  • May obstruct ADAS sensors or cameras — recalibration and validation required.

EV-specific touring tyres

₹68,000
RIDERZPRO CUSTOMAVAILABLE

Higher load rating and lower rolling resistance. An EV is heavier and quieter than the car a standard tyre was designed around.

Professional engineering validation required

  • Changes rolling stock — fitment, load and speed rating validation required.

Why one of these has no price

Mahindra has not published the SPORTEQ tyre sizes in the material we hold. Going up an inch without the factory size in writing means guessing at rolling circumference, load rating and clearance — on a heavy, fast, rear-wheel-drive car. We would rather lose the sale than validate a fitment we cannot check.

09

CUSTOM LIGHTING

RIDERZPRO LIGHT LAB — cabin, welcome and cargo light only.

Welcome lighting

₹16,000
RIDERZPRO CUSTOMAVAILABLE

Cabin and puddle light sequence on approach. Does not touch a road-lighting function.

Professional engineering validation required

  • Taps the vehicle's electrical system — professional installation and validation required.

Boot and frunk lighting

₹9,500
RIDERZPRO CUSTOMAVAILABLE

Proper light in both storage areas. The frunk has none worth the name from the factory.

Professional engineering validation required

  • Taps the vehicle's electrical system — professional installation and validation required.

Ground projection

Concept — road legality unresolved
RIDERZPRO CUSTOMCONCEPT

Projected logo on the ground at the doors. Concept only — projected light from a vehicle has road-legality questions we have not answered yet.

Professional engineering validation required

  • Affects lighting — road-legal configuration required under applicable Indian regulations.
  • Subject to applicable Indian regulations and certification requirements.

Subject to applicable Indian regulations and certification requirements.

DRL modification

Not offered — road-legality risk
RIDERZPRO CUSTOMCONCEPT

We are not currently willing to modify the BE 6's daytime running lights. The lighting signature is a homologated road-lighting function and altering it puts road legality at risk.

Professional engineering validation required

  • Affects lighting — road-legal configuration required under applicable Indian regulations.
  • Subject to applicable Indian regulations and certification requirements.

Subject to applicable Indian regulations and certification requirements.

Professional engineering validation required

  • Affects lighting — road-legal configuration required under applicable Indian regulations.
  • Subject to applicable Indian regulations and certification requirements.

Subject to applicable Indian regulations and certification requirements.

10

THE BUILD PROCESS

Seven stages from a sketch to a numbered part. This is the same board we work from internally.

  1. 01

    CONCEPT

    Sketched against the real car and its real dimensions.

    3 parts
  2. 02

    3D MODEL

    Modelled to scanned geometry, not to a photograph.

    3 parts
  3. 03

    PROTOTYPE

    First article printed in the target material.

    3 parts
  4. 04

    TEST FIT

    Fitted to a customer-representative car. Panel gaps, clearances, sensor lines.

    3 parts
  5. 05

    SAFETY CHECK

    Airbag paths, ADAS obstruction, load paths, road legality.

    2 parts
  6. 06

    FINAL DESIGN

    Revisions closed, drawing frozen, part numbered.

    2 parts
  7. 07

    LIMITED PRODUCTION

    Printed to order in batches, each part traceable to its version.

    5 parts

Where the concept actually is

CONCEPT
3
3D MODEL
3
PROTOTYPE
3
TEST FIT
3
SAFETY CHECK
2
FINAL DESIGN
2
LIMITED PRODUCTION
5

Limited edition numbering

RIDERZPRO BE 6 — 001/___

The concept is designed to support a numbered limited run. No production quantity has been decided, so none is advertised. The badge shows the format, not a promise.

11

FACTORY vs RIDERZPRO

What is Mahindra's, what is ours, and what is still only an idea.

 Factory BE 6RIDERZPRO Edition
Factory powertrainYesYes — unmodified
Factory battery and warrantyYesYes — untouched
Mahindra MAIA / TEQ suitesYesYes — factory software, unmodified
Custom exterior—Riderzpro
3D-printed parts—Riderzpro
Premium audio16-speaker Harman KardonRiderzpro DSP, amplification and damping over it
PPF and coatingAccessoryRiderzpro
Custom interiorAccessoryRiderzpro
Vehicle securityTEQ_Secure, Secure360 Pro, digital keyRiderzpro concept, additional to it
AI featuresMAIA architecture, six TEQ suitesRiderzpro concept, separate software
Ballistic protection—Concept — untested, uncertified
Post-quantum security—Concept — architecture study only

Rows marked as concept are not production-ready and cannot be bought. Nothing in the RIDERZPRO column is a Mahindra feature.

12

EXPECTED LAUNCH

No launch date has been set. The concept moves when the parts move — the Lab pipeline on this page is the real status, and it is the same board we work from internally.

We are not going to invent a launch quarter to make this page feel more finished. When the parts clear safety check and the security work has been reviewed by someone independent, there will be a date here.

Be first

JOIN THE RIDERZPRO BE 6 WAITLIST

No deposit, no commitment, no vehicle held. You will hear from us when there is something real.

Joining the waitlist is not an order and holds no vehicle. The RIDERZPRO Limited Edition is a concept with no confirmed launch date, no confirmed price and no confirmed production quantity. We will only contact you about the BE 6 programme.

Important — please read

The RIDERZPRO BE 6 Limited Edition is an independent aftermarket concept developed by RIDERZPRO. It is not a Mahindra product, not a Mahindra variant, and carries no Mahindra endorsement, certification or partnership. Mahindra and BE 6 are trademarks of Mahindra & Mahindra Ltd, used here to identify the vehicle the concept is based on. The factory vehicle, its specifications and its warranty are Mahindra's; everything described as RIDERZPRO is ours.

RIDERZPRO Limited Edition is an independent customisation concept by RIDERZPRO and is not a factory Mahindra variant.